News
Card image cap

Restoring clarity in residential ventilation specification

With awareness of indoor air quality (IAQ) growing, and buildings becoming more airtight, its vital housing associations and federations are confident the ventilation systems they install will perform as expected. Certification helps by providing the independently verified data crucial to choosing the right product. However, in the world of residential ventilation there are several different product schemes – although some may look alike, they are not. If decision makers are unsure what certification is right for their project, product decisions may be compromised. This could lead to poor IAQ, higher than expected energy bills, non-compliance with regulations, complaints from clients and costly repairs or replacement.

Residential ventilation certification

In the European market, two widely recognised certifications often appear in discussions around Mechanical Ventilation with Heat Recovery (MVHR) systems:

  • Passivhaus Component Certification
  • Eurovent Certified Performance

Both contribute to high-quality residential ventilation projects. However, they are designed for different purposes and operate at different levels within the decision-making process.

Passivhaus (Passive House) is a building concept and project framework focused on achieving ultra-low-energy buildings through an integrated approach to design and construction.

Eurovent Certified Performance is an independent third-party product certification programme that verifies the real-world performance of residential ventilation systems.

These roles are complementary, but not interchangeable. This can create confusion during specification and procurement. While Passivhaus Component Certification verifies that the product will perform as expected in a Passivhaus project, it does not guarantee performance, or regulatory compliance, when used in standard housing stock. Likewise, while Eurovent Certified Performance can guarantee product performance and regulatory compliance in a wide range of residential projects, it does not verify compliance with the Passivhaus building standard. This distinction matters.

Understanding the certifications: Passivhaus Component Certification

Developed by the Passivhaus Institute (PHI), Passivhaus Component Certification supports projects pursuing the Passivhaus building standard. It evaluates whether ventilation systems meet the requirements needed for integration into highly energy-efficient Passivhaus buildings.

The certification applies to several categories of residential ventilation products, including centralised and decentralised systems. It assesses parameters according to Passivhaus standards, such as:

  • Heat recovery rate
  • Electric power consumption
  • Comfort criterion
  • Internal and external leakage
  • Acoustic performance
  • Room air hygiene (filter)
  • Frost protection.

The certification framework is closely connected to the Passive House Planning Package (PHPP), allowing certified products to be incorporated into Passivhaus energy modelling calculations. For projects targeting the Passivhaus standard, the certification provides an important project-level design reference and allows for comparison of products within the PHPP.

Understanding the certifications: Eurovent Certified Performance

Eurovent Certified Performance focuses on a different question: whether declared performance data is accurate. To this end, the certification independently verifies performance through a comprehensive and impartial certification process including laboratory tests, factory audits, data analysis and a strict surveillance process to ensure continued compliance.

The Eurovent Certified Performance programme for Residential Air Handling Units (RAHU) applies to residential MVHR systems with airflow rates between 250 and 1000 m³/h. It certifies performance to the globally recognised EN 13141-7+A1:2025 test standard.

The programme verifies published product data including:

  • Leakage class
  • Aeraulic performances
  • Airflow/pressure curves
  • Maximum airflow [m³/h]
  • Electrical consumption [W]
  • Specific Power Input SPI [W/(m³/h)]
  • Temperature efficiency / COP
  • Performances at cold climate conditions
  • SEC (Specific Energy Consumption) in [kWh/(m²/y]
  • A-weighted global sound power levels [dB(A)].

Eurovent Certified Performance provides a guarantee that products will perform as advertised. It supports market transparency and aids product comparison across the broader residential market. The certification also ensures regulatory compliance with EU Ecodesign and Energy Performance of Buildings Directive (EPBD).

Why the distinction matters

As residential ventilation standards continue to evolve across Europe, clarity around verification methods becomes increasingly important. Certifications that support building standards and product performance serve different purposes within the specification chain:

  • Passivhaus Component Certification is essential for achieving the Passivhaus standard, providing highly specific data for ultra-efficient building projects.
  • Eurovent Certified Performance serves the wider residential market, providing independently verified, regulation-compliant data that supports transparent product comparison and informed decision-making.

The two approaches address different needs within the market but coexist within the same ecosystem. For housing associations and federations, the central question is not which framework is better, but which certification is appropriate for the project.

The bottom line: Passivhaus certified products are for projects aiming for the Passivhaus building standard. Eurovent Certified Performance exists to provide broader product-level confidence - helping housing organisations meet regulatory requirements and energy targets, while keeping clients healthy and happy.

Discover more at www.eurovent-certification.com