Home

You can select a Certification Programme from the list below to retrieve its description (scope of the programme, definitions...)

  See certified products


 
Scope of the programme

The Eurovent Drift Eliminators Certification Programme applies to specific references of Drift Eliminators used for evaporative water-cooling equipment.

Definitions

Drift Eliminator: Inertial water droplet stripping devices used to reduce the amount of circulating water that can be entrained in the unit airflow and leave the equipment.

Evaporative cooling equipment: Any equipment that uses water distribution and generates aerosols for the purpose of heat transfer.

Drift Rate: Proportion of the drift volumetric flow rate to the circulating water flow rate entrained in the airflow and exiting at the discharge of the eliminator, expressed as a percentage.

Break-through air velocity: Air velocity for which drift losses become visible at any point of the drift eliminator, expressed in m/s.

Testing requirements

All standard ratings shall be verified by isokinetic tests conducted in accordance with the Cooling Technology Institute test code ATC-140. Measurements shall be 1.5 m downstream in the airflow leaving the eliminators.
Certified characteristics

  • The certified drift eliminator has produced a drift rate less than or equal to 0.01% when tested according to the relevant Eurovent Rating Standard.
  • The value over time of this certification is subject to proper installation and maintenance of the drift eliminator and to the respect of adequate manufacturer's recommendations.
  • Breakthrouugh velocity is given for information only.
General Reference documents


Certification Manual 13th (November 2016)
Reference documents


OM-14-2014


RS 9/C/003-2014